Let’s start project together!
Tell us about your project and we’ll get back to you within 24 hours.
Product features

Build Big
330 × 330 × 565 mm build volume

Low Part Cost
50% lower part cost than legacy powder bed fusion systems

Productive
3x throughput vs. Industrial Competitors

ntuitive and Reliable
Fits through a standard door
Fuse X1 — Industrial SLS 3D printer
Fuse X1 is a large-format industrial SLS 3D printer, built for engineers, manufacturers, and service bureaus looking to produce large prototypes and high-volume end-use parts with a faster turnaround. Its massive  build volume and high packing density enable same-day large parts and 3x the throughput compared to competing platforms. AI-powered Print Intelligence monitors jobs from first layer to final part to reduce failures. Setup takes about an hour, print-to-print changeover takes minutes, and the same end-to-end workflow handles extraction, powder reclaiming, and finishing — moving parts from printed to polished in as little as 15 minutes.
Technology
- Adaptive Thermal Control enables unlimited packing freedom, and exceptional part quality by delivering, maintaining, and sintering powder at an incredibly stable temperature.
- Print Intelligence uses AI-powered computer vision to isolate and prevent failures, maximizing uptime so you get great parts on time every time.
Workflow

Prepare


Swap

Unpack

Finish
Build Big
Produce full-scale production quality parts in a massive build volume or run production builds at over 30% packing density to manufacture thousands of end use parts in days, not weeks.
○ 330 × 330 × 565 mm build volume.
Low Part Cost
Fuse X1 delivers up to 50% lower part cost than legacy powder bed fusion systems in less than half the floorspace. Fuse X1 is cost-competitive with injection molding for tens of thousands of parts.
Productive
With 30%+ packing density and a 61.5L build volume, the Fuse X1 fits more parts in a single build than competing industrial SLS and MJF systems, adding up to thousands more parts per week.
â—‹ 3x throughput vs. Industrial Competitors
Intuitive and Reliable
Fuse X1 fits through a standard door, doesn’t require facility retrofit, and installs and prints on day one. An intuitive touchscreen guides you, while the build unit enables 5-minute changeovers.
Large Format SLS, Simplified
Prepare
Auto-pack, optimize, and organize in PreForm: Orient, hollow, or label models, estimate print times, and automatically pack parts for optimized density, reducing print time and limiting waste. Import STL, OBJ, 3MF, or models directly from a wide range of CAD applications.
Print large parts in hours, not days: Most large builds complete under 24 hours, with same-day large parts in 5 hours. Print Intelligence detects and masks anomalies in real time to protect yield.
Swap
5-minute print changeovers with the Fuse X1 Build Unit: Roll one build unit out, roll the next one in, with blind-mate power and data connectors. Insulation allows natural cooling inside the unit, so the printer can start the next job.
Unpack
Hands-off powder recovery with Fuse Sift X1: Integrated compressed air, sealed glovebox, and parts hatch keep breakout clean and fast. Capacity for 3 to 5 full builds of used powder, with automatic powder transport to the Mix Kit.
Finish
Clean and Polish with Fuse Blast: New 400 mm Fuse Blast Large Tumbler Basket fits 2-3× Fuse build volumes and 50% more parts per cycle. Optional Polishing System upgrade delivers smooth, semi-gloss, dye-ready surfaces.
Technical Specifications
| Product | Fuse 1+ 30W |
|---|---|
| Technology | Selective laser sintering (SLS) | Class 1 Laser Product |
| Build volume | 330 × 330 × 565 mm | 13.0 × 13.0 × 22.2 in (61.5 L) |
| Layer thickness | 110 microns | 0.004 in |
| Laser type | Ytterbium Fiber, 120 W |
| Laser spot size | 330 microns | 0.012 in |
| Throughput | 0.330 sintered kg/hr |
| Max Packing Density | 30%+ (volume), 48%+ (mass) |
| Material Refresh Rate | As low as 20% |
| Materials | Nylon 12, Nylon 11*, Nylon 12 GF**, TPU**, Open Material Mode |
| Print Intelligence | AI-powered real-time print failure prevention |
| Footprint | 1.3 m^2 / 14.1 ft^2 |
| Power Requirements | 200-240VAC single phase, 50/60Hz, 50A rating |
| Warranty and Services | 200-240VAC single phase, 50/60Hz, 50A rating |
Let’s start project together!
Please fill out the form to request a quote. We will get back to you within 24 hours of receiving your request. Thank you for your patience
